Have you noticed your hinged patio door doesn't open as seamlessly as it used to? Don't worry, a few minor adjustments to the adjustment screws on the hinged of your Frenchwood® Hinged Inswing Patio Door, manufactured before November 2005, can return your door to its seamless operation.

How to Adjust Hinges on Frenchwood® Inswing Patio Doors

Slightly adjusting the adjustment screws on your patio door hinges can be done in a few quick steps outlined in an adjustment guide or YouTube® video below.

When to Use This Article

To help maintain proper operation, inspect the condition of your hinges and clean them at least once per year. If you live in a coastal, industrial, or agricultural area with higher levels of airborne material like dirt, dust, smoke, and salt spray, we recommend following these instructions at least every three (3) months.

Misaligned hinges may cause:

• Stiff or difficult handle and lock operation.
• Weatherstrip rubbing on the frame or panel.

This Article Will Help You:

• Adjust your patio door hinges.

Tools and Supplies Needed

• 5/32-inch hex wrench

Let's Get Started

Adjust Your Frenchwood® Inswing Patio Door Hinges

Follow steps one (1) through 11 starting on Page 3 of the Hinge Replacement & Hinge and Hardware Adjustment Guide (0005105), or the instructions in the Andersen® YouTube® video below.

Adjusting A Frenchwood® Inswing Patio Door (Pre-2005)

®2026 Andersen Corporation. All rights reserved.