This article will assist with replacing the casement or awning window operator covers and provide links for ordering and replacement.

Replace Casement or Awning Window Operator Cover

If you need additional assistance identifying your window type, visit our Identify Your Product Guided Help Pathway.

Replacement Parts

To order casement and awning window operator covers choose the link below:

Casement

Casement windows were manufactured prior to 1974, the operator cover is joined to the operator and cannot be replaced individually. There were two (2) styles of operator covers manufactured from 1974 to 1995. Depending on the vintage of the operator cover, there are either two (2) screw holes on the top of the operator cover or no screw holes. Operator covers are also shipped when replacement operators are ordered. Select the links for the corresponding vintage of the casement window.

• A-Series and 400 Series Casement Operator Covers
• 400 Series Casement Operator Cover (1978 - 1995)
• 400 Series Casement Operator Cover (1974 - 1979)

Awning

If the awning window was manufactured prior to 1995, some operator covers are joined to the operator and cannot be replaced individually. The original operator may have had a cover, but the compatible replacement will not have a separate cover. For 100 series casement and awning window operator covers, see 100 Series Casement and Awning Replacement Hardware. Select the links for the corresponding vintage of the awning window.

• A-Series and 400 Series Awning Operator Covers
• Awning Operator Cover (1976 - 1981)

Installation

To install replacement hardware on your casement or awning window, follow the instructions provided.

• Lock Handle/Bezel and Operator Handle/ Cover Replacement Guide (9050359)

©2026 Andersen Corporation. All rights reserved.