Learn how to replace the insect screen handle on an Andersen® 100 Series gliding patio door using simple steps.

Replacing an Insect Screen Handle on an Andersen® 100 Series Gliding Patio Door

This article shows how to remove and install the insect screen handle on your patio door. The handle helps open, close, and secure the screen panel.

Replacement Parts

Replacement insect screen handle kits are available in black from the Andersen® Parts Store.

100 Series Gliding Patio Door Insect Screen Handle Kit  

The handle kit includes:

1. Outside handle
2. Inside handle
3. Lock handle
4. Lock latch (locks the screen in place)
5. Screws

Tools and Supplies

• Safety Glasses
• Phillips Screwdriver

Installation

Insert the Lock Latch

Insert the lock latch into the side slot of the insect screen frame.

Make sure the lip faces the outside of the door.

Insert the Lock Latch

Attach the Inside Handle

Slide the latch into the inside handle.
Align the tabs and press until the handle snaps into place.

Align and Secure the Interior Handle

Attach the Outside Handle

Insert the tabs of the outside handle into the holes on the outside of the frame.

Attach the Outside Handle

Secure the Handle

Insert the screw and tighten it with a Phillips screwdriver.
Make sure the handle is tight and does not move.

Tighten the Handle Screw

Helpful Tips

If the Handle Feels Loose

• Make sure the latch is fully in place
• Check that the handle is snapped in securely
• Tighten the screw if needed

Additional Help

For more insect screen adjustments, see Insect Screen Installation and Adjustment on 100 Series Gliding Patio Door.

Contact Andersen® Windows and Doors for additional assistance.

© 2026 Andersen Corporation. All rights reserved.