Andersen® dual-ball-bearing or tandem rollers are designed for smooth gliding performance and feature self-contained leveling adjusters for easy alignment. These rollers are pressure-fit, not screwed in place.

How to Install and Adjust Replacement Rollers on Andersen® Gliding Patio Doors

If your dual-ball-bearing or tandem rollers are damaged, they will need to be replaced and adjusted during installation.

These rollers are used on:

• 200 Series and 400 Series gliding doors manufactured from 1982 to Present.
• 100 Series gliding doors manufactured from March 15, 2010 to Present.

Note: While the rollers on E-Series gliding patio doors look different from those on 400 Series, the adjustment instructions are the same.

• Refer to the written instructions specific to E-Series roller replacement for further details. See Roller Replacement: E-Series Gliding Patio Doors (9069167).

400 and 200 Series Tandem Roller

This Article Will Help You:

• Determine if your rollers need to be replaced.
• Install and adjust replacement rollers on gliding patio doors.

Tools and Supplies Needed

• Safety glasses
• Phillips screwdriver or drill with Phillips bit
• A large and a medium to small flat blade screwdriver

Let's Get Started

Install and Adjust Replacement Rollers on Gliding Patio Doors

• If you have not confirmed that your rollers are damaged, see Identify and Order Andersen® Gliding Patio Door Rollers for steps on how to inspect them for damage. This article will also help you identify and order the right replacement rollers for your gliding patio door.
• If your patio door is difficult to operate but the rollers are not visibly damaged, see Adjust Operating Panel on Andersen® Gliding Patio Doors.

Once you have received your replacement rollers, the video below will walk you through how to install and adjust them.

Important: To install replacement rollers, the patio door panel must be removed.

Note:

• During installation, be sure to remove the adjustment plugs to allow for proper roller alignment if needed.
• It's recommended to replace both rollers to maintain balanced operation.

We have service providers available to assist with installing the replacement part. Contact Andersen® Windows and Doors for an installation quote.

©2026 Andersen Corporation. All rights reserved.