Many Andersen® windows and patio doors are available with a primed interior finish option. A primed surface is designed to provide a good base for field-applied paints. When painting Andersen® products with a primed wood surface, follow the instructions provided below.

Components may need to be removed during painting. For instructions to remove and reinstall the window sash, patio door panel or hardware, see the Technical Documents  section of the Andersen website. For information on Matching Andersen® Window and Patio Door Stain and Paint Colors, see, Matching Andersen® Window and Door Stain and Paint Colors.

Current windows and doors available with a primed interior finish option:

Andersen® Complementary entranceways

Andersen® 400 Series and A-Series Complementary windows and patio doors

Andersen® A-Series windows and patio doors

Andersen® E-Series windows and patio doors

Andersen® Primed casement sash (1932-1989)

Painting Primed Interior Unfinished Surfaces

Tools / Supplies Needed

3M Scotch-Brite® Pad or Steel Wool

Tack Cloth

High-Quality Interior Oil- or Water-Based Trim Paint (specified for the type of wood trim)

Plastic Scraper

1. Open or remove the component being painted. Please see Technical Documents  to find instructions on window and patio door panel installation or removal

    

2. Lightly scuff the primed surface with a 3M Scotch-Brite® Pad or steel wool to aid in paint adhesion

    

3. Remove dust particles with a tack cloth

    

4. Apply two (2) coats of paint, following the paint manufacturer's instructions

    

5. Clean excess paint from the glass using a plastic scraper

    

6. Let the paint fully dry before closing or reassembling

©2024 Andersen Corporation. All rights reserved. All marks where denoted are trademarks of their respective owners.