Andersen® 100 Series gliding patio doors with insect screens include an insect screen latch receiver on the door frame to align with the insect screen frame. It fits into two pre-drilled holes in the patio door frame and can be repositioned to ensure smooth locking. 100 Series gliding patio door insect screens also use screen guides to keep the unit in place.

Install Latch Receiver and Insect Screen Guides on Andersen® 100 Series Gliding Patio Doors

This article provides you with resources for ordering and installing replacement latch receivers and insect screen guides on 100 Series gliding patio doors.

Safety Warning

Tools and Supplies Needed

• Safety glasses
• Phillips head screwdriver

Let's Get Started

1. Order Parts

You can order a replacement gliding patio door insect screen hardware pack online from the Andersen Parts Store. This pack includes two (2) insect screen guides, two (2) screws, and a latch receiver.

2. Install Parts

Install and Adjust Latch Receiver

1. Locate the latch receiver on the door frame.
2. Remove the two (2) screws holding the latch receiver in place.
3. Position the new latch receiver in the same location.
4. Insert and tighten the screws to secure the new latch receiver.
5. Adjust the latch receiver up or down as needed to ensure a proper fit.
6. Fully tighten the screws once the latch receiver is correctly aligned.

Install Screen Guides

1. Locate the top corners of the insect screen, just outside the rollers.
2. Firmly press the two (2) black insect screen guides into place, with the contoured side facing down.

If needed, Contact Andersen® Windows and Doors for additional assistance.

Related Articles

For assistance installing and adjusting the insect screen for proper operation, see Install Insect Screens on Andersen® 100 Series Gliding Patio Doors.

© 2026 Andersen Corporation. All rights reserved.