To keep glass, aluminum, vinyl, Fibrex® material, or fiberglass surfaces looking like new, or to remove unsightly scuffs and marks, follow the cleaning recommendations below.
The cleaners/solvents listed are acceptable when cleaning glass, aluminum, vinyl, Fibrex® material, or fiberglass at ambient temperature conditions. Other cleaners can have abrasives that can scratch or chemicals that can damage and cause performance or aesthetic issues to the finish.
Mild Soap and Water
50/50% Solution of Distilled White Vinegar and Water
Windex® Original Glass Cleaner
Sprayway® 050 Glass Cleaner
Glass Plus® Cleaner
Mr. Clean® Multi-Surface Cleaner
Soft Scrub® Multi-Surface Cleaner
Fantastik® Multi-Surface Cleaner
Formula 409® Multi-Surface Cleaner
CRL® Silicone Remover and Surface Preparation - Part Number SR200
CRL® Sparkle Cleaner and Stain Remover
Goo Gone® Original Adhesive Remover
Goo Gone® Goo & Adhesive Remover Gel Spray
Important Information on Cleaning Glass
Before cleaning the glass, we recommend identifying the glass type to ensure the glass cleaner will not harm the glass. To identify the glass type, locate the Andersen glass logo. For assistance, see Glass Type Identification for Andersen® Windows and Patio Doors.
If you are unsure of the glass type or where to find the Andersen® glass logo, please Contact Andersen® Windows and Doors.
HeatLock Glass Logo
If the glass logo includes "HeatLock™", abrasive cleaners such as CRL® Silicone Remover and Surface Preparation - Part Number SR200, Cerium Oxide, Soft Scrub® and toothpaste should never be used on the interior glass surface.
Do not clean glass in direct sunlight.
Do not use newspaper to dry the glass surface as the ink may discolor the surrounding material.
Remove removable interior grilles before cleaning the glass.
Acid solutions used to wash masonry will damage the glass. Follow the acid solution manufacturer’s instructions carefully. Protect and/or cover the product during the cleaning process to prevent acid contact. If acid contacts the window or door unit, immediately wash all surfaces with clean water.
Do not use ethanol or other alcohol-based cleaning products or wipes.
Do not use abrasive cleaners or solvents as they may cause damage to the unit.
Do not use ketones (MEK, MIBK) or xylene as a surface conditioner to clean the material's surface.
If a ladder or scaffolding is needed make sure the ladder or scaffolding is secure and care is taken during cleaning. Failure to do so may result in injury.
Power washing/pressure washing is not recommended.
Do not use metal razor blades.
Cleaning Instructions
Wipe loose dirt and grime with a soft clean dry cloth.
Apply a cleaning solution to the product and wipe it away.
Rinse with clear water if soap has been used.
Remove the cleaning solution with a clean, lint-free cloth or squeegee.
®2025 Andersen Corporation. All rights reserved. All marks where denoted are trademarks of their respective owners.
