Side jambs are the pieces that form the sides of a door panel. On the stationary panel (the door panel that does not glide or slide), Andersen® 400 and 200 Series gliding patio doors have a weatherstrip called the stationary side jamb weatherstrip, which is applied to the side of the unit frame.

Install Stationary Side Jamb Weatherstrip on Andersen® 400 or 200 Series Gliding Patio Door

This article provides you with resources for ordering and installing a replacement stationary side jamb weatherstrip on a 400 or 200 Series gliding patio door.

Stationary Side Jamb Weatherstrip

Let's Get Started

1. Order Parts

Before ordering a replacement stationary side jamb weatherstrip, determine the size and exterior color of the gliding patio door.

• To determine your patio door size, see Determine the Size of Your Andersen® Window or Patio Door.
• To determine your patio door color, see Exterior Colors for Andersen® Windows and Patio Doors.
  • Note: White weatherstrip is used on white patio doors, while gray weatherstrip is used on all other exterior patio door colors.

You can purchase replacement stationary side jamb weatherstrip  online from the Andersen Parts Store. It will work with both left-hand and right-hand gliding patio doors.

Note:

• If you have a two-panel patio door, you will only need one (1) piece of replacement stationary jamb weatherstrip.
• Three-panel and four-panel gliding patio door units will need two (2) pieces of replacement stationary side jamb weatherstrip.
  • For more information on three-panel gliding patio doors, see Compare Two- and Three-Panel Perma-Shield® Gliding Patio Doors.

2. Install Parts

To replace the stationary side jamb weatherstrip, contact an Andersen® Service Provider for assistance. For more information, see Locating Andersen® Window and Patio Door Service Providers.

©2026 Andersen Corporation. All rights reserved.