Replacement gliding insect screen wheel assemblies, rollers, and guide springs are available for 400 Series Frenchwood®, 200 Series Perma-Shield®, and 200 Series Narroline® gliding patio doors. Depending on the gliding insect screen vintage, there may be spring-loaded rollers on both the top and bottom of the panel or stainless steel springs on the top and rollers on the bottom. To verify your gliding insect screen vintage, inspect your current rollers or springs in your gliding insect screen by removing the insect screen from the track. If the insect screen was ordered after the patio door, the rollers may not precisely reflect the represented image for each vintage below. For assistance identifying your Andersen® products, visit our Identify Your Product  pathway in the Andersen® Window and Door Help Center.

To remove the insect screen, follow the instructions provided in the Patio Door Gliding Insect Screen Care and Maintenance. Once the insect screen has been removed from the track, match its insect screen rollers with the images below. For each roller type, there is a link to the Andersen Online Parts Store.

Manufactured 1982 - 1991

Upper Spring Guide 

Lower Insect Screen Roller 

Manufactured 1991 - Present

Upper Wheel Assembly 

Lower Wheel Assembly 

Installation

To install or adjust replacement wheel assemblies, rollers, or guide springs, reference A-Series, 400, and 200 Gliding Insect Screen Roller Replacement and Adjustment Guide or Roller Maintenance and Adjustment for Gliding Insect Screens. Contact Andersen® Windows and Doors today for assistance with quoting or installing the replacement parts.

©2024 Andersen Corporation. All rights reserved.